Changing part of a building and the subdivision trap
Why dividing one planning unit into two can need permission, what physical evidence points to two units, and the severance conditions hiding in old permissions.
Dividing one building into two can be development even where neither resulting use changes. That is the trap in a change of use part of a building application. Alongside the use of each part, there is a second question: whether the single planning unit has become two. Section 55 of the Town and Country Planning Act 1990 makes the use of a building previously used as a single dwellinghouse as two or more separate dwellinghouses a material change of use expressly, and for other buildings the same result follows from the facts where subdivision has planning consequences.
Architects meet this when a client asks to let the upper floors separately and assumes the ground floor permission covers it.
Identifying the existing planning unit
Before anything else, establish what the single unit currently is. The unit is the unit of occupation, assessed as a matter of fact, and a building occupied as a whole by one business is one unit even where its floors do different things.
That single unit carries its own flexibility. If the whole building falls within Class E, movement between the sub-classes is not development. Where the building is in mixed use, no such flexibility exists at all.
Subdivision attacks the unit itself. Two units occupied separately each have their own use, their own planning history from that point, and their own permitted development position.
Why subdivision can itself be development
For dwellings the statute is explicit. Converting a house into two flats is a material change of use of the building and of each part of it, so permission is always needed, whatever the external appearance.
For other buildings there is no express provision, and the answer depends on whether the subdivision produces a material change in the use of the land. Dividing a large shop into two smaller shops may well not be development, because the use remains retail and the planning consequences are limited. Dividing an office building so that the upper floors become a separate self-contained unit with its own access, parking demand and servicing pattern is a different matter.
The factors that tip it are practical rather than doctrinal:
- whether a new access from the highway or a new entrance is formed
- whether parking and servicing demand changes in character or distribution
- whether the intensity of use increases
- whether the parts become capable of separate disposal, which signals two units
- whether one part would attract different planning policy from the other
Where none of those applies, the subdivision is often not development. Where several do, assume it is and apply.
Separate access and the physical evidence
Access is the clearest indicator. A building with one entrance, one stair core and one service connection reads as one unit. Put in a second front door, install separate supplies to each floor and give each a postal address, and the physical evidence points to two.
| Feature | Points to one unit | Points to two units |
|---|---|---|
| Access | Shared entrance and circulation | Separate external doors or a dedicated stair |
| Services | Single supply, shared metering | Separate supplies and meters |
| Addressing | One postal address | Separate addresses allocated by the council |
| Rating | One assessment | Separate rating or council tax entries |
| Disposal | Occupied and dealt with as a whole | Capable of separate letting or sale |
| Fire strategy | One building, one strategy | Compartmentation between occupancies |
That table cuts both ways. If you want to argue one unit, keep the shared arrangements genuine rather than nominal. A shared entrance that one occupier never uses will not persuade anyone.
Shared services and the single unit argument
Clients often want the commercial benefit of separate lettings with the planning simplicity of a single unit. That combination is hard to sustain.
Where the intention is to keep one unit, the arrangements have to reflect it: a shared reception or lobby in actual use, shared facilities, a single lease to one occupier with sub-occupation on licence rather than separate leases, and services that are not separately supplied. Even then, if the parts are occupied by unconnected businesses with their own staff and customers, the argument weakens over time.
Where the intention is two units, say so and apply. A permission for a part change of use, properly described, is worth more than an arrangement that works until someone asks about it.
Fire separation and the Building Regulations position
Subdivision triggers Building Regulations work independently of the planning position, and the two are often confused.
Creating separate occupancies requires compartmentation between them, protected means of escape from each, and in residential cases sound insulation meeting the resistance to sound requirements, which apply to a material change of use as well as to new build. Access and sanitary provision also have to be considered for each new unit.
A full building control application rather than a building notice is the right route for this work, because the compartmentation and escape design needs checking before construction. Escape design drives the architecture here rather than following it, so resolve it before the layout is fixed.
Describing a part change of use accurately
Where an application is needed, the description has to identify the part and the use with precision.
A workable description names the floor or area, the existing use class, the proposed use class and, where relevant, the fact of subdivision. Something like change of use of first and second floors from Class E(g)(i) to three self-contained flats, including subdivision of the planning unit, leaves nothing to argue about later.
Three things to avoid. Describing it as change of use of part without identifying which part. Omitting the subdivision when it is the substance of the proposal. And relying on the drawings alone to convey the extent, since the description governs.
Conditions requiring the parts to remain linked
Councils frequently condition against severance, and these conditions are easy to miss and expensive to breach. Typical examples restrict occupation of a flat to a person employed in the business below, require the upper floors not to be occupied separately from the ground floor, or tie an annexe to the main dwelling as ancillary accommodation.
Check for them in the planning history of any building you are reconfiguring. A condition imposed in 1998 preventing separate occupation of the first floor is still enforceable, and a breach of condition notice carries no right of appeal. Where a condition is the obstacle, a section 73 application to vary it is the route, and it needs a planning case rather than a request.
Checking the position before a lease is granted
The practical sequence for an architect or agent advising on this is short.
- Identify the existing planning unit and its lawful use, from the planning history and the rating record.
- Check every permission for conditions restricting severance or separate occupation.
- Test the proposal against the subdivision factors, access first.
- If subdivision is material, apply, and describe it accurately.
- If you think it is not material, consider a certificate of lawful proposed use under section 192 before the lease is signed.
- Programme the building control work alongside the planning work rather than after it.
Granting a lease of part is the moment the position crystallises, and it is also the moment a purchaser's or funder's solicitor will look. Settling it beforehand costs a fraction of unwinding it afterwards.
A Planning Statement that addresses the planning unit question directly, rather than describing only the end use, is what persuades a case officer that the applicant has understood the proposal. Where the end use is itself unclear, our pieces on co-living schemes and their use class, film and television studios and sports and social clubs in Class F2 or sui generis show how much turns on classification.
Enter your postcode on PlanScope to see which documents a part change of use on your building would need.
This is general guidance, not legal advice; check the position with your local planning authority or a qualified professional before relying on it. PlanScope provides AI-assisted draft reports for planning applications. Reports should be reviewed before submission. We do not guarantee planning approval.
Frequently asked questions
Is dividing a house into two flats always development?
Yes. Section 55 of the Town and Country Planning Act 1990 provides expressly that using a building previously occupied as a single dwellinghouse as two or more separate dwellinghouses involves a material change of use of the building and of each part of it. Permission is always required, whatever the external appearance.
Is subdividing a commercial building development?
It depends on the facts. There is no express provision for non-residential buildings, so the question is whether the subdivision produces a material change in the use of the land. New access arrangements, altered parking and servicing demand, increased intensity and the parts becoming capable of separate disposal all point towards it being material.
What evidence shows that two planning units exist?
Separate external access or a dedicated stair, independently metered services, separate postal addresses, separate rating or council tax assessments, compartmentation between occupancies, and the parts being let or sold separately. One shared entrance that an occupier never actually uses will not support an argument that a single unit survives.
Can I keep one planning unit and still let the floors separately?
It is hard to sustain. Keeping a single unit requires shared arrangements that are real rather than nominal: a lobby in actual use, shared facilities, a single lease with sub-occupation on licence, and services that are not independently metered. Unconnected businesses with their own staff and customers will eventually be treated as separate units.
How should a part change of use be described?
Name the floor or area affected, the existing use class, the proposed use class, and the fact of subdivision where that is the substance of the proposal. The description governs the permission, so avoid change of use of part without identifying the part, and do not leave the extent to be inferred from the drawings.
What if an old permission prevents separate occupation?
The condition remains enforceable however old it is, and a breach of condition notice carries no right of appeal. The route is an application under section 73 to vary or remove the condition, supported by a planning case explaining why the restriction is no longer necessary. Check the planning history before granting any lease of part.
Sources and further reading
This article is general guidance about the planning system in England and, where stated, the rest of the UK. It is not legal or professional advice. Check your local planning authority’s validation requirements and take professional advice for your specific site.