Report Deep Dives – Page 5
Section-by-section anatomy of each of the 66 planning report types, beyond the basics.
Report Deep Dives articles – page 5
377 articlesLux contour plots and what they should show
A lux contour plot has to prove two things at once: that the lit area works, and that light is not escaping to a neighbour's window. Here is what the plot, the grid and the luminaire schedule need to show.
Hoarding, crane and oversail sections of a management plan
These three sections commit you to things planning cannot grant. Here is what each has to show and which consent actually delivers it.
Collision data sections and how to read them
A collision record with no pattern in it proves very little. Here is how the section is built, what the severity figures hide, and when the data supports mitigation.
Visibility splay calculations and the standards behind them
A splay is two numbers and a triangle, but both numbers come from a survey rather than the speed limit. Here is how the calculation is built and defended.
How to read a swept path analysis appendix
Swept path drawings are the appendix nobody reads until the highway officer objects. Here is what the lines mean and where the weaknesses usually are.
Waste storage calculations and bin store design
A refuse storage calculation planning officers accept has three parts: a sourced generation rate, the right container mix, and a store the collection crew can actually reach.
Infiltration testing appendices in a drainage strategy
The infiltration rate decides whether the rest of the drainage design is possible, and the appendix has to show enough raw data for a reviewer to recalculate it.
Limitations and assumptions sections that protect a report
Reviewers read the limitations section first, because it tells them what the conclusions are worth. Specific, short and uncomfortable in places beats a page of boilerplate.
The mitigation schedule and how it becomes conditions
A mitigation schedule consolidates commitments across an environmental statement and maps each one to a condition, an obligation or the approved drawings.
Cumulative effects chapters and how schemes are selected
Cumulative chapters fail on the scheme list rather than the technical work. A tiered selection, a stated cut-off date and a receptor-led synthesis are what make one usable.
Requesting an EIA scoping opinion and what to put in it
A scoping opinion fixes what your environmental statement must cover. Regulation 15 sets a short statutory minimum for the request; the useful part is what you choose to add.
Receptor sensitivity and magnitude in a visual impact chapter
Sensitivity and magnitude drive every conclusion in a visual impact chapter. Here is how each is built, and how to tell a reasoned judgement from an assertion.
Trading rules and unit deficits in a net gain assessment
Trading rules decide whether created units can count against lost ones. Here is how the distinctiveness bands bind, and what a deficit really costs.
Baseline biodiversity value sections and their evidence
Every unit of biodiversity gain is measured against the baseline. Here is what the baseline section should contain, what evidence to ask for, and where it gets contested.
The be lean chapter of an energy statement
The first stage of the energy hierarchy reports the saving achieved by fabric, form and services efficiency alone. Here is what belongs in it, in what order, and what does not.
The deposit model in an archaeological desk-based assessment
The deposit model answers the question a planning archaeologist actually asks: at what depth and in what condition would remains survive here. Here is how it is built and how it should conclude.
Damage cost calculations in an air quality assessment
The damage cost approach converts a development's extra emissions into a contribution towards air quality measures. Here is the arithmetic, the inputs that move it, and how to test the result.
The construction noise and vibration chapter
A construction noise and vibration chapter predicts levels from real plant data, judges them against a stated threshold method and sets out mitigation an officer can condition. Here is how each part works.
Version control between consultants on one application
Reports that disagree about unit numbers or site area are the first thing an objector finds. Here is the document control a major application needs, from controlled schedules to the pre-submission check.
Sensitivity testing a result that sits near a threshold
A result two per cent from a policy threshold is the weakest part of any evidence base. Here is how to test it, report a range and close the argument before a consultee reopens it.
Figures and drawings that make a technical chapter readable
A constraints plan relying on four shades of green fails the moment someone prints it in black and white. Here are the figure conventions that keep a technical chapter legible.
Peer review and the reviewer's scope of liability
Peer review means three different things, and the difference decides where liability sits. Here is how to define scope, review an AI-assisted draft and sign off in terms you can defend.
Baseline years and why they date a technical report
The baseline date is the date a technical report starts expiring from. Here are the validity conventions by discipline, and how to avoid losing a survey season to a lapsed one.
Mitigation registers and drafting conditions from them
Commitments buried in technical chapters rarely reach the condition schedule intact. A numbered mitigation register fixes that, and makes the draft conditions almost write themselves.
Not sure which documents your council will ask for?
Enter your postcode and PlanScope recommends the right reports for your project, then drafts them in minutes.
Enter your postcode on PlanScope